Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Wake Forest, NC

Pressure Washing in Wake Forest, NC

High-pressure cleaning for driveways, walkways, patios, pool decks and other hard surfaces, with the pressure matched to each surface. Typical cost $150-$600.

From the free quote to the final rinse, pressure washing in Wake Forest, NC follows a simple process: inspect, protect, clean, rinse and check.

How we clean it

Pressure washCleaning method

When to book pressure washing

  • Driveway or walkways look dark, gray or streaky
  • Green or black growth in shaded areas and along edges
  • Slippery surfaces after rain
  • Oil, rust or tire marks you can't scrub out
  • You're getting ready to sell, seal or paint

Why it gets dirty

  • Dirt and pollen that settle into the pores of concrete
  • Mold, mildew and algae in damp, shaded spots
  • Oil and fluid drips from vehicles
  • Rust from sprinklers, furniture and fertilizer
  • Tire marks and general foot traffic

Easy upkeep between cleanings

  • Sweep off leaves and loose debris so they don't stain
  • Blot fresh oil drips with cat litter or an absorbent right away
  • Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
  • Rinse pollen off with a garden hose during heavy pollen season

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Etched lines and 'zebra stripes' from holding a narrow tip too close
  • Water forced into window frames, door sills and siding laps
  • Damaged plants and lawns from chemical runoff
  • Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery

How we handle pressure washing

  1. Walk the property and note surfaces, stains and anything fragile
  2. Protect plants, outlets, lights and doors, and move small items
  3. Pre-treat organic growth and degrease oil spots
  4. Clean with the right pressure and a surface cleaner for even results
  5. Rinse, post-treat to slow regrowth, and walk the job with you

How much does pressure washing cost?

$150-$600Typical range for a typical home's driveway, walkways and patio
1-4 hoursTypical time on site
Once a year for most homesRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Local pressure washing for Wake Forest, NC

Shaded driveways, walkways and pool decks in North Carolina grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Spring pollen season in North Carolina coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Red clay soil is common in parts of North Carolina. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

Crews serve all of Wake Forest (ZIP codes 27587 and 27588), plus Rolesville (4.9 mi), Franklinton (8.9 mi), Knightdale (13.4 mi) and Creedmoor (13.9 mi). Call (555) 010-0000 for a free quote in Wake Forest.

Pressure Washing: frequently asked questions

How much does pressure washing cost in Wake Forest, NC?

Pressure Washing typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pressure washing?

Pressure Washing is usually done with pressure wash, with the pressure adjusted for each surface. Delicate surfaces nearby, such as siding, windows and plants, are protected or cleaned with lower pressure.

Is pressure washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pressure washing?

Once a year for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Wake Forest, NC

Soft Washing

Low-pressure cleaning with a mild solution that kills mold, mildew and algae on siding, roofs and other delicate surfaces without damaging them.

Typical $300-$800

Oil Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $100-$300

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Deck Restoration & Staining for Cedar

Low-pressure wash. Cedar decks and fences turn silver-gray as the surface weathers.

Typical $800-$2,500

Awning Cleaning

Cleaning fabric, vinyl and metal awnings on homes and storefronts to remove dirt, mildew and bird droppings.

Typical $150-$500

Soft Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $300-$800

Brick Cleaning

Brick cleaning for walls, chimneys, steps and patios that removes algae, dirt and efflorescence without eroding mortar.

Typical $250-$700

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

Efflorescence Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $200-$600

Soft Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$800

Driveway Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

Pool Deck Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Wake Forest, NC. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote